Jensen Iso-Max pro-isolators present a complete range of passive, hum-eliminating solutions for balanced and unbalanced signals where absolute audio performance is required. These feature ultra-wide frequency response, exceptional signal handling (up to +24dB) and immunity to external electromagnetic fields. Built into an easy-to-install flanged outer shell, each model comes equipped with standard connectors or may be special ordered to suit. Also included is a terminal strip for greater connectivity plus a set & forget bottom-mount dip switch to optimize each setup to suit your specific installation. This makes the Jensen Iso-Max professional ground isolators well suited for broadcast, recording, live touring and the most demanding audio installations.
Line Input - Two channel isolator for professional line inputs up to +22 dB. May be used with any combination of balanced or unbalanced sources or destinations. Screw-down terminals for easy integration.
Line Input - Single channel isolator for professional line inputs up to +22 dB. May be used with any combination of balanced or unbalanced sources or destinations. Screw-down terminals for easy integration.
Line Input - Single channel isolator for professional line level inputs up to +19 dBu. May be used with any combination of balanced or unbalanced signals. Comes standard with XLR-F input and XLR-M output.
Line Input - Two channel isolator for professional line inputs up to +19 dBu. May be used with any combination of balanced or unbalanced signals. Comes standard with XLR-F inputs and XLR-M outputs.
Audio to CAT-5 Converter - Two channel isolator sends -10 dB consumer level audio over CAT-5/6 cable for easy integration with network wiring. Passive design features send and receive modules for each end. Dual RCA input and output jacks with RJ45 connectors for CAT-5 termination.
Speaker to Line Converter - Two channel isolator converts speaker level signals to +4 dBu balanced line level for distributed audio systems. Adjustable output via DIP switch. Comes with Speakon inputs and XLR outputs. Other versions available: SC-2NR speaker level to consumer audio level and SS-2NR speaker level to subwoofer audio level.
Universal Isolator - Single channel ground isolator may be used at the beginning, middle or end of a signal path. Ideally suited for long cable runs for large scale system integration, broadcast stations and recording studios. Single channel universal ground isolator for signals up to +24 dB. Designed for long cable runs; may be placed anywhere along the signal path for easy integration in large scale systems.
Mic Splitter - Single channel, 2-way microphone splitter with 1-isolated output and 1-direct output. Features dual Faraday shield for low noise. Configurable phantom power management circuit.
Mic Splitter - Two channel, 2-way microphone splitter with 1-isolated output and 1-direct output per channel. Features dual Faraday shield for low noise. Configurable phantom power management circuit.
