Broadcast

The following products are popular with radio and TV broadcasters. Click more at the bottom of the page for a wider selection.

DIN-2LI
More Info Buy Now $219.99

Line Input - Two channel isolator for professional line inputs up to +22 dB. May be used with any combination of balanced or unbalanced sources or destinations. Screw-down terminals for easy integration.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Module width:
  • Optimal cable length:
  • Line input isolator, eliminates ground loops
  • < 10 Hz to 50 kHz
  • +19 dBu @ 20 Hz, +22 dBu @ 50 Hz
  • 95 dB @ 60 Hz
  • Gold plated plug in screw terminal
  • 52 mm (2.05”)
  • Output - 1 m (3')
Buy Now
PI-XX
More Info Buy Now $149.99

Line Input - Single channel isolator for professional line level inputs up to +19 dBu. May be used with any combination of balanced or unbalanced signals. Comes standard with XLR-F input and XLR-M output.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for balanced line inputs
  • < 5 Hz to 40 kHz
  • +19 dBu @ 20 Hz, +22 dBu @ 50 Hz
  • 95 dB @ 60 Hz
  • XLR
  • Output - 1 m (3')
Buy Now
PI-2XX
More Info Buy Now $269.99

Line Input - Two channel isolator for professional line inputs up to +19 dBu. May be used with any combination of balanced or unbalanced signals. Comes standard with XLR-F inputs and XLR-M outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for balanced line inputs
  • < 5 Hz to 40 kHz
  • +19 dBu @ 20 Hz, +22 dBu @ 50 Hz
  • 95 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 1 m (3')
Buy Now
PB-2XX
More Info Buy Now $349.99

Universal Isolator - Two channel ground isolator may be used at the beginning, middle or end of a signal path. Ideally suited for long cable runs for large scale system integration, broadcast stations and recording studios.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for balanced line inputs
  • < 1 Hz to 200 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 125 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 30 m (100')
Buy Now
VB-1RR

Composite Video - Single channel 75 Ω transformer video isolator eliminates ‘hum bars’ caused by ground loops. Flanged enclosure for easy mounting with BNC or RCA input and output connectors.

  • Primary application:
  • Bandwidth:
  • Insertion loss:
  • CMRR noise rejection:
  • Standard Connectors:
  • CCTV camera isolation
  • 10 Hz to 10 Mhz
  • 0.55 dB
  • 120 dB @ 60 Hz
  • BNC or RCA
Buy Now
VB-1BB

Composite Video - Single channel 75 Ω transformer video isolator eliminates ‘hum bars’ caused by ground loops. Flanged enclosure for easy mounting with BNC or RCA input and output connectors.

  • Primary application:
  • Bandwidth:
  • Insertion loss:
  • CMRR noise rejection:
  • Standard Connectors:
  • CCTV camera isolation
  • 10 Hz to 10 Mhz
  • 0.55 dB
  • 120 dB @ 60 Hz
  • BNC or RCA
Buy Now
MI-XX
More Info Buy Now $149.99

Mic Input Isolator - Single channel ground isolator and RFI suppressor for low impedance (150 to 200 Ω nominal) balanced microphone signals to eliminate noise and ground loops.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Eliminating noise on a mic input
  • < 10 Hz to 100 kHz
  • +2 dBu @ 20 Hz
  • 120 dB @ 60 Hz
  • XLR
  • Output - 30 m (100')
Buy Now
MS-2XX
More Info Buy Now $269.99

Mic Splitter & Isolator - Two channel device provides ground isolation and RFI suppression for low impedance 150~200 Ω balanced microphone signals. Configurable for stereo two way mic ‘splitter’ or noise eliminator.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Eliminating noise on a mic input
  • < 10 Hz to 100 kHz
  • +2 dBu @ 20 Hz
  • 120 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 30 m (100')
Buy Now
SUB-XX
More Info Buy Now $149.99

SUB-XX - Single channel isolator with extended low frequency response for pro audio subwoofers with balanced XLR inputs 5.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for line inputs
  • < 1 Hz to 5 kHz
  • +18 dBu @ 20 Hz, +22 dBu @ 50 H
  • 105 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 1 m (3')
Buy Now
SUB-2XX
More Info Buy Now $269.99

Sub Woofer - Dual input isolator with extended low frequency response delivers full bass signal without compromise. Up to +18 dB signal handling at 20 Hz. Comes standard with XLR-F inputs and XLR-M outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for line inputs
  • < 1 Hz to 5 kHz
  • +18 dBu @ 20 Hz, +22 dBu @ 50 Hz
  • 105 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 1 m (3')
Buy Now

ISO•MAX Product Request

Model #:
Description: Testing this out for words test test

    Your Information










    1. Immediately RequiredNeed Assistance

    Questions you may have?