Interface

Audio interface

MMDI-Pro
More Info Buy Now $169.99

Wall Plate Direct Box - Single channel DI converts +4 dBu pro line level signal to mic level. Fits single gang electrical box with Decora® face plate. Screw terminal output for easy termination.

  • Primary application
  • Frequency response
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connector:
  • Converting Hi-Z signals to balanced mic level
  • < 10 Hz to 100 kHz
  • +22 dBu @ 20 Hz, +25 dBu @ 50 Hz
  • 100 dB @ 60 Hz
  • XLR-F
Buy Now
MMDI-Mini
More Info Buy Now $169.99

Wall Plate Direct Box - Single channel passive multi-media DI converts stereo Hi-Z signal from a laptop to a mono mic level. Fits single gang electrical box with Decora® face plate. Screw terminal output for easy termination.

  • Primary application
  • Frequency response
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connector:
  • Converting Hi-Z signals to balanced mic level
  • < 10 Hz to 100 kHz
  • +22 dBu @ 20 Hz, +25 dBu @ 50 Hz
  • 100 dB @ 60 Hz
  • 3.5 mini TRS inputs, balanced screw terminal output
Buy Now
MS-8N2
More Info Buy Now $999.00

Mic Splitter - Eight channel 2-way passive mic splitter with one isolated and one direct output per channel. Features dual Faraday shields and MuMETAL® can to eliminate RF. Configurable phantom circuitry. Nema box ready for easy installation.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Eliminating noise on a mic input
  • < 10 Hz to 100 kHz
  • +2 dBu @ 20 Hz
  • 120 dB @ 60 Hz
  • Plug in screw terminal
Buy Now
MS-8N3
More Info Buy Now $1,199.00

Mic Splitter - Eight channel 3-way passive mic splitter with two isolated and one direct output per channel. Features dual Faraday shields and MuMETAL® can to eliminate RF. Configurable phantom circuitry. Nema box ready for easy installation.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Eliminating noise on a mic input
  • < 10 Hz to 100 kHz
  • +2 dBu @ 20 Hz
  • 120 dB @ 60 Hz
  • Plug in screw down terminal
Buy Now
MS-2XX
More Info Buy Now $269.99

Mic Splitter & Isolator - Two channel device provides ground isolation and RFI suppression for low impedance 150~200 Ω balanced microphone signals. Configurable for stereo two way mic ‘splitter’ or noise eliminator.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Eliminating noise on a mic input
  • < 10 Hz to 100 kHz
  • +2 dBu @ 20 Hz
  • 120 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 30 m (100')
Buy Now
PI-RJ2X
More Info Buy Now $269.99

Pro Audio to CAT converter - Two channel isolator sends +4 dB professional level audio over CAT-5/6 cable for easy integration with network wiring. Passive design features send and receive modules for each end. Dual XLR input and output jacks with RJ45 connectors for CAT cable termination.

  • Primary Application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Extending Lo-Z signals using CAT-5 cable
  • < 5 Hz to 40 kHz
  • +19 dBu @ 20 Hz
  • 95 dB @ 60 Hz
  • XLR input & output, RJ45 extender
  • Output - 110 meters (350’)
Buy Now
CI-RJ2R
More Info Buy Now $209.99

Audio to CAT-5 Converter - Two channel isolator sends -10 dB consumer level audio over CAT-5/6 cable for easy integration with network wiring. Passive design features send and receive modules for each end. Dual RCA input and output jacks with RJ45 connectors for CAT-5 termination.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Extending Hi-Z signals using CAT-5 cable
  • < 5 Hz to 40 kHz
  • +19 dBu @ 20 Hz
  • 95 dB @ 60 Hz
  • RCA input & output, RJ45 extender
  • Output - 110 meters (350’)
Buy Now
PC-2XR
More Info Buy Now $299.99

Pro to Consumer - Two channel isolator converts +4 dB professional balanced signals down to -10 dB for use with consumer audio devices such as laptops or video recorders. Comes with XLR-F inputs and RCA outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Converting +4 dB balanced to -10 dB unbalanced
  • < 10 Hz to 140 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 120 dB @ 60 Hz
  • XLR and RCA with plug in screw terminal
  • Output - 1 m (3')
Buy Now
SP-2SX
More Info Buy Now $269.99

Speaker to Line Converter - Two channel isolator converts speaker level signals to +4 dBu balanced line level for distributed audio systems. Adjustable output via DIP switch. Comes with Speakon inputs and XLR outputs. Other versions available: SC-2NR speaker level to consumer audio level and SS-2NR speaker level to subwoofer audio level.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Converting speaker level signals to line level
  • < 5 Hz to 40 kHz
  • DIP switch for 25, 75, 250 or 750 Watts
  • 95 dB @ 20 Hz
  • Speakon and XLR, plug in screw terminal
  • Output - 1 m (3')
Buy Now

ISO•MAX Product Request

Model #:
Description: Testing this out for words test test

    Your Information










    1. Immediately RequiredNeed Assistance
    Questions you may have?