Home Theatre

There is nothing more frustrating than finally putting all the pieces of your home theater together, turning it on to watch your favorite movie and… all of a sudden, you are confronted with a terrible hum. In home audio systems, this is typically caused by the cable TV connection, less than ideal electrical wiring or voltage differentials known as DC offsets that often occur between two pieces of equipment. You can spend hours hopelessly trouble-shooting or simply insert an Iso-Max ground hum eliminator into the signal path to solve the problem. With a Jensen transformer inside, you can be sure that the signal quality will be maintained without distortion, phase shift or artefact of any kind.

SP-2SX
More Info Buy Now $269.99

Speaker to Line Converter - Two channel isolator converts speaker level signals to +4 dBu balanced line level for distributed audio systems. Adjustable output via DIP switch. Comes with Speakon inputs and XLR outputs. Other versions available: SC-2NR speaker level to consumer audio level and SS-2NR speaker level to subwoofer audio level.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Converting speaker level signals to line level
  • < 5 Hz to 40 kHz
  • DIP switch for 25, 75, 250 or 750 Watts
  • 95 dB @ 20 Hz
  • Speakon and XLR, plug in screw terminal
  • Output - 1 m (3')
Buy Now
SUB-1RR
More Info Buy Now $129.99

Low Frequency Line Input - Single channel device provides isolation at the input of a sub-woofer via RCA connectors. Extended low frequency response delivers bass down to 20 Hz without loss or distortion.

  • Primary application
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for consumer sub-woofers
  • < 1 Hz to 5 kHz
  • +20 dBu @ 20 Hz
  • 105 dB @ 60 Hz
  • RCA
  • Output - 1 m (3')
Buy Now
SUB-2RR
More Info Buy Now $199.99

Low Frequency Line Input - Two channel device provides isolation at the input of a sub-woofer via RCA connectors. Extended low frequency response delivers bass down to 20 Hz without loss or distortion.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for consumer sub-woofers
  • < 1 Hz to 5 kHz
  • +20 dBu @ 20 Hz
  • 105 dB @ 60 Hz
  • RCA
  • Output - 1 m (3')
Buy Now

ISO•MAX Product Request

Model #:
Description: Testing this out for words test test
Your Information
  1. Immediately RequiredNeed Assistance
Questions you may have?

Loading...