Pro Audio

SUB-2XX
Order #: J208-0200
More Info Buy Now $299.99

Sub Woofer - Dual input isolator with extended low frequency response delivers full bass signal without compromise. Up to +24 dB signal handling at 20 Hz. Comes standard with XLR-F inputs and XLR-M outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Ground isolation for line inputs
  • < 1 Hz to 5 kHz
  • +19 dBu @ 20 Hz, +22 dBu @ 50 Hz
  • 105 dB @ 60 Hz
  • XLR with plug in screw terminal
  • Output - 1 m (3')
Buy Now
CI-RJ2R
Order #: J304-0277
More Info Buy Now $209.99

Audio to CAT-5 Converter - Two channel isolator sends -10 dB consumer level audio over CAT-5/6 cable for easy integration with network wiring. Passive design features send and receive modules for each end. Dual RCA input and output jacks with RJ45 connectors for CAT-5 termination.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Extending Hi-Z signals using CAT-5 cable
  • < 5 Hz to 40 kHz
  • +19 dBu @ 20 Hz
  • 95 dB @ 60 Hz
  • RCA input & output, RJ45 extender
  • Output - 110 meters (350’)
Buy Now
DB-2PX
Order #: J216-0220
More Info Buy Now $299.99

Instrument Direct Box - Two channel isolator converts Hi-Z instrument signals to a balanced mic level to interface with PA and recording consoles. Comes standard with 1/4” TRS inputs and XLR-M outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Converting Hi-Z instrument levels to balanced mic
  • < 10 Hz to 100 kHz
  • +22 dBu @ 20 Hz, +25 dBu @ 50 Hz
  • 100 dB @ 60 Hz
  • 1/4” TRS and XLR with plug in screw terminal
  • Output - 30 m (100')
Buy Now
PC-2XR
Order #: J214-0201
More Info Buy Now $329.99

Pro to Consumer - Two channel isolator converts +4 dB professional balanced signals down to -10 dB for use with consumer audio devices such as laptops or video recorders. Comes with XLR-F inputs and RCA outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Converting +4 dB balanced to -10 dB unbalanced
  • < 10 Hz to 140 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 120 dB @ 60 Hz
  • XLR and RCA with plug in screw terminal
  • Output - 1 m (3')
Buy Now
SP-2SX
Order #: J304-0280
More Info Buy Now $229.99

Speaker to Line Converter - Two channel isolator converts speaker level signals to +4 dBu balanced line level for distributed audio systems. Adjustable output via DIP switch. Comes with Speakon inputs and XLR outputs.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Optimal cable length:
  • Converting speaker level signals to line level
  • < 5 Hz to 40 kHz
  • DIP switch for 25, 75, 250 or 750 Watts
  • 95 dB @ 20 Hz
  • Speakon and XLR, plug in screw terminal
  • Output - 1 m (3')
Buy Now
DIN-LOD
Order #: J400-0008
More Info Buy Now $159.99

Line Output - Single channel ground isolator for professional line output where a long cable run is required. Provides exceptional signal handling at high levels and at all frequencies to 300 meters (1000’) without loss.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Module width:
  • Optimal cable length:
  • Driving long cables in balanced systems
  • < 2 Hz to > 200 kHz
  • +22 dBu @ 20 Hz, +25 dBu @ 50 Hz
  • 110 dB @ 60 Hz
  • Gold plated plug in screw terminal
  • 52 mm (2.05”)
  • Output - no limitations
Buy Now
DIN-LOF
Order #: J400-0012

Line Output - Single channel ground isolator for professional line output where a long cable run is required. Provides superior signal handling at high levels and at all frequencies.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Module width:
  • Optimal cable length:
  • Driving long cables in balanced systems
  • < 10 Hz to > 100 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 94 dB @ 60 Hz
  • Gold plated plug in screw terminal
  • 36 mm (1.42”)
  • Output - no limitations
Buy Now
DIN-2LOF
Order #: J400-0010
More Info Buy Now $149.99

Line Output - Two channel ground isolator for professional line output where a long cable run is required. Provides superior signal handling at high levels and at all frequencies.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Module width:
  • Optimal cable length
  • Driving long cables in balanced systems
  • < 10 Hz to > 100 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 94 dB @ 60 Hz
  • Gold plated plug in screw terminal
  • 36 mm (1.42”)
  • Output - no limitations
Buy Now
DIN-PB
Order #: J400-0006
More Info Buy Now $179.99

Universal Isolator - Single channel ground isolator may be used at the beginning, middle or end of a signal path. Ideally suited for long cable runs for large scale system integration, broadcast stations and recording studios. Single channel universal ground isolator for signals up to +24 dB. Designed for long cable runs; may be placed anywhere along the signal path for easy integration in large scale systems.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Module width:
  • Optimal cable length:
  • Ground isolation for balanced line inputs
  • < 1 Hz to 200 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 125 dB @ 60 Hz
  • Gold plated plug in screw terminal
  • 52 mm (2.05”)
  • Output - 30 m (100')
Buy Now
DIN-PC
Order #: J400-0024
More Info Buy Now $139.99

Pro to Consumer - Single channel ground isolator provides isolation as it coverts +4 dBu professional line level signals to -10 dB for use with consumer level devices such as laptop computers and hi-fi systems.

  • Primary application:
  • Frequency response:
  • Max signal handling:
  • CMRR noise rejection:
  • Standard connectors:
  • Module width:
  • Optimal cable length:
  • Signal conversion at line input
  • < 10 Hz to 140 kHz
  • +21 dBu @ 20 Hz, +24 dBu @ 50 Hz
  • 120 dB @ 60 Hz
  • Gold plated plug in screw terminal
  • 36 mm (1.42”)
  • Output - 1 m (3')
Buy Now

ISO•MAX Product Request

Model #:
Part #:
Description: Testing this out for words test test
Your Information
  1. Immediately RequiredNeed Assistance
Questions you may have?

Loading...